Share |

SPECIFICATONS

Voices: One.
Audio Outputs: One
External Inputs:
One.
Interface: 1 rotary encoder, 24 knobs, 21 illuminated switches.
Display: 20 x 4 blue backlit liquid crystal.
Memory: 8 banks of 99: 396 patches in ROM, 396 in RAM.
Presets: 4 factory banks of 99 in ROM, 3 designer sets of 99 in RAM.
Weight: 10 lbs.
Dimensions: 3 rack spaces, 8 inches deep.
Power: 90 - 250 volts AC auto switching.

VOICE ARCHITECTURE

VCOs:

Three voltage controlled discrete analog oscillators. Osc 1 waveforms: triangle, sawtooth and variable width square; Osc 2 waveforms: sine, sawtooth and variable width square; Osc 3 waveforms: triangle, sawtooth and variable width square. All waveforms output simultaneously. Osc 1 syncs to Osc 2 and 3.

VCFs:

Two voltage controlled discrete analog filters: 24db (classic Moog®), 12db (classic Oberheim®). 12db filter incorporates low pass and band pass modes. Filter frequency range expanded by a whole tone.

Envelopes:

Four multiple stage envelope generators, attack, decay, sustain and release with inverting and multiple triggering. Envelope 1 fixed to filter frequency. Envelope 2 fixed to amplifier level. Envelopes 3 and 4 are assignable. ADSR speed increased from standard SE-1X.

LFOs:

Three low frequency oscillators, triangle, sawtooth, reverse sawtooth, square, noise and random waveforms. One destination and amount for each LFO with key trigger, phase and midi sync.

Glide:

Glide and auto glide, linear or exponential.

Fuzz:

Switchable fixed value hardware amplifier overdrive for saturated distortion.

Presets:

4 factory banks, Scroggins Synquence, Infared and Daidemer.

Faceplate:

High contrast 4 color phat fu branded front panel art.

Additional Features:

Noise generator, hardware ring modulation, external audio input (requires midi trigger to open gate).

Modulation Destinations:

LFOs 1, 2 and 3: VCOs 1, 2 and 3 frequency; VCOs 1, 2 and 3 mix level; VCOs 1, 2 and 3 pulse width; ring mod mix level; noise mix level; VCF resonance; VCF frequency and volume. Envelopes 3 and 4: VCOs 1, 2 and 3 frequency; VCOs 1, 2 and 3 mix level; VCOs 1, 2 and 3 pulse width; ring mod mix level; noise mix level; LFO 1, 2 and 3 rate and depth and VCF resonance.

MIDI Controllers:

Dynamics, modwheel, pressure and breath control: destinations and amounts include all LFO and envelope 3 destinations; bender: pitch and filter frequency; receives program change, bank select, glide on/off, glide time and volume. Fixed continuous controller assignments for all key front panel controls.

MIDI Specifications:

In, out and thru.

© 1999-2017 Analogia Inc. - Ardent Proprietors of Studio Electronics. All Rights Reserved.
FacebookInstagramTwitterYouTubeSoundCloud
Site & Sounds by CaprettaKid