SPECS GALLERY REVIEWS BUY PURCHASE
BOOMSTAR MKII - $1399

Boomstar is a return to the raw power and purity of non-programmable discrete analog, where STUDIO ELECTRONICS started in 1985. The snap and punch of hardware envelopes drive the Boomstar's brilliant discrete voltage controlled circuits with unparalleled sonic integrity and versatility; refaced, and revoiced, the Boomstar MKII is likely the ultimate desktop analog synthesizer for those who remember, and desire still, analog synth sounds that changed the music, and sound seekers who have yet to discover that electric magic and delight in their time—via MIDI or CV of course.

The Boomstar's alchemy of combinable waveform oscillations—with sub, OSC1-OSC2 sync—filter and oscillator xmod, ring mod, 5 revered filter types, extensive modulation routing made easy via its 18+ toggle switches, and a flexible software LFO, make sound and music design a daring delight. Hardware envelopes with invert, loop, drone and master mode deliver that flexible, funky snap and shift.

The quick-turn shaft pots along the bottom for the hardware ring mod, noise, and feedback are diode-based for more complex and interesting harmonic distortion, and VCO Levels make vital sonic changes intimate, immediate, and indispensable; the adjacent overdrive switch adds beefy boost, warmth, and edge. 29+ pots ensure a fluid, intuitive groove over wide-ranging sweeps, and subtle tone variations: whip them suddenly and rhythmically into shape, or feather in the changes. Can't decide which model deserves your attention? It does help that Boomstar is a discrete, through-hole, hand-matched transistor, semi-modular desktop monophonic synthesizer, built in the U.S.A. to last, no matter which glowing circuit, handcrafted filter model you choose—the first time.

5 LEGENDARY FILTERS
— CLICK FOR DEMOS —

Classic, buttery & boomy Moog® 24dB ladder

Creamy, dreamy, multi-mode Yamaha® CS-80

Ripping Jupiter-Juno Roland® magic

Original Lord Tom Oberheim® 2-pole 12dB/octave, boxy, reedy & boomy gem

Powerfully resonant, thumpy and mid-rangy ARP® 2600

Hardware Envelopes

Sharp-dressed and snappy, single or multiple triggering (VCA 2), envelopes hearken back to our MIDIMINI roots; drone and master modes update the tech.

Discrete Analog Tone

All discrete circuity, with our trademark hand matched transistors in the filter and amp.

CV and Gate In, Ext. In

Control Voltage, Gate, and External input connectivity for old school interfacing, speed, MIDI freedom, and external source processing flexibility.

GALLERY
1/6
BOOMSTAR MKII HIGHLIGHTS

1. Refaced for clarity of function, signal flow and an overall visual/tactile assist.

2. Revoiced for purity of tone—more headroom into amplifier; browning-out is delayed.

3. Diode-based feedback circuit for greater dynamic range and harmonic distortion content.

4. Exotic and rugged hand-picked and handcrafted lumber/microlumber sides: Bocote, Marblewood, and Pau Ferro.

5. Lined, fluted knobs and lined quick-turn pot shafts top and bottom for more precise programming and patch recall.

6. Metal-shafted pots installed throughout, apart from the envelopes, where the custom taper plastic-shafted pots are strengthened with an added bushing.

SidesExoticia® Bocote, Marblewood, and Pau Ferro, end bells are hand selected, handcrafted one-offs, and will vary greatly in grain and attractive imperfections, but they are always character rich, and easily transcend exact appearance expectation. Expect a richly figured hardwood. Sides are now mounted with blind screws, for a devastating... prettiness. CAUTION! Micro-lumber may appear even prettier when immediately in front of you.

REFACE, RE-SIDE AND REPLACE

Pre-MKII Boomstars can be upgraded to MKII visuals and knob/pot improvements.

$499 with end bells: chassis with SidesExotica® Bocote, Marblewood, USA-only Indian Rosewood, and Pau Ferro.

$249 remove and replace MKI pots and knobs: "Tonestar" fluted knobs and metal-shafted pots installed throughout, apart from the envelopes, where the custom taper plastic-shafted pots are strengthened with an added bushing: proper ENV pot tapers are not available in metal; top and bottom quick-turn pot shafts are now lined.

Order Upgrades

SPECS AND FUNCTIONS

Construction

Sturdy steel chassis, 29-31 pots, 2 rotary switches, 18-19 toggle switches—15 three way for expanded functionality—AC power triple output desktop adaptor (15, -15 Volt Auto-Switching Supply). Tried and true through-hole technology—not surface mount—for integrity of sound quality, durability, and serviceability.

Dimensions

Height: 2.05" (52.07 mm) at front, 3.625" (92.075 mm) at back, Width: 8.7 " (220.98 mm), Depth: 7.05" (179.07 mm).

Sound Generation

All discrete circuity, with the exception of the software LFO. Hand matched transistors in filter and amplifier.

Oscillator 1

6 position rotary range switch; Two center off toggle switches select combinations of sine, triangle, saw and square waveforms; Pulse width for square waveform; Sub oscillator with center off toggle switch for half and full level positions; Sync oscillator 2 to oscillator 1 switch.

Oscillator 2

6 position rotary range switch; Three position toggle switch to select triangle, saw or square waveform; Fine tune pot; Mod depth pot with center off toggle switch to select modulation by envelope 1 or 2; Keyboard tracking on-off switch.

Filter / Envelope 1

Frequency and resonance pots; Center off toggle switch to select half and full keyboard tracking; Envelope mod depth pot; Additional mod depth pot with center off toggle to select modulation by oscillator 2 or the LFO. Envelope 1: Attack, decay, sustain, and release pots; Center off toggle switch to select envelope invert or envelope loop.

Filter Types

3003—resonant low-pass, diode ladder, 4-pole 24 dB/octave (Roland® TB-303); 4072—resonant low-pass, 4-pole 24 dB/octave—12 kHz design miscalculation corrected—(ARP® 2600); 5089—resonant low-pass, transistor cascade ladder, 4-pole 24 dB/octave (Moog® Model D); 8106—multi-mode non-resonant high-pass, resonant low-pass, 4-pole 24 dB/octave (Roland® Jupiter8); SEM—multi-mode resonant low‑pass/high‑pass, band‑pass and notch, 2-pole 12 dB/octave (Oberheim®); SE80—dual resonant hi-pass/low-pass, 2-pole 12 dB/octave (Yamaha® CS-80).

Envelope 2

Attack, decay, sustain, and release pots; Center off toggle switch to select envelope invert or LFO gate trigger; Single or multiple triggering switch; Center off toggle switch to select drone and envelope 1 as master. With master selected, envelope 2 is the modulator for both the amplifier and filter frequency. Envelope 1 remains active for oscillator 2 frequency and oscillator 1 pulse width modulation.

XMod

Oscillator 2 mod depth pot with center off toggle switch to select modulation of oscillator 1 pulse width or oscillator 1 frequency.

LFO

Rate pot; MIDI sync on-off switch; Waveform pot: sine, triangle, saw up, saw down, square, offset square 1 and 2, random and slew random waveforms; Mod depth pot with center off toggle switch to select oscillator 1 frequency or oscillator 1 pulse width; Mod depth pot with center off toggle switch to select oscillator 2 frequency or oscillator 2 pulse width.

Amplifier

Center off toggle switch to select two levels of overdrive; Volume pot.

Tuning

Master tune pot.

Bender

Bend range pot.

Glide

Hardware exponential glide time pot.

Dynamics

(routes MIDI keyboard) Dynamics to filter frequency pot.

Envelope 1 to Pulse Width 1 (ENV1> PW1)

(routes) Envelope 1 to Oscillator 1 pulse width pot.

Mixer - OSC

Oscillator 1 level pot; Oscillator 2 level pot.

Mixer - Ring Mod

Hardware Ring Modulator level pot.

Mixer - Noise

Noise level pot.

Mixer - Feedback

(routes the synth's output back through the filter) Feedback level pot.

Front Panel Jacks

CV in, Gate in, Filter frequency modulation in, Amplifier modulation in, Oscillator out, External signal in.

Back Panel Jacks

MIDI In, MIDI Out, 1/4" Audio out, Traveller input (SE80 model only), DC power input.

Back Panel Switches

Learn switch: Selects MIDI channel.

Overflow Switch

For chaining together multiple Boomstars together via MIDI overflow.

SPECS AND FUNCTIONS

Construction

Sturdy steel chassis, 29-31 pots, 2 rotary switches, 18-19 toggle switches—15 three way for expanded functionality—AC power triple output desktop adaptor (15, -15 Volt Auto-Switching Supply). Tried and true through-hole technology—not surface mount—for integrity of sound quality, durability, and serviceability.

Dimensions

Height: 2.05" (52.07 mm) at front, 3.625" (92.075 mm) at back, Width: 8.7 " (220.98 mm), Depth: 7.05" (179.07 mm).

Sound Generation

All discrete circuity, with the exception of the software LFO. Hand matched transistors in filter and amplifier.

Oscillator 1

6 position rotary range switch; Two center off toggle switches select combinations of sine, triangle, saw and square waveforms; Pulse width for square waveform; Sub oscillator with center off toggle switch for half and full level positions; Sync oscillator 2 to oscillator 1 switch.

Oscillator 2

6 position rotary range switch; Three position toggle switch to select triangle, saw or square waveform; Fine tune pot; Mod depth pot with center off toggle switch to select modulation by envelope 1 or 2; Keyboard tracking on-off switch.

Filter / Envelope 1

Frequency and resonance pots; Center off toggle switch to select half and full keyboard tracking; Envelope mod depth pot; Additional mod depth pot with center off toggle to select modulation by oscillator 2 or the LFO. Envelope 1: Attack, decay, sustain, and release pots; Center off toggle switch to select envelope invert or envelope loop.

Filter Types

3003—resonant low-pass, diode ladder, 4-pole 24 dB/octave (Roland® TB-303); 4072—resonant low-pass, 4-pole 24 dB/octave—12 kHz design miscalculation corrected—(ARP® 2600); 5089—resonant low-pass, transistor cascade ladder, 4-pole 24 dB/octave (Moog® Model D); 8106—multi-mode non-resonant high-pass, resonant low-pass, 4-pole 24 dB/octave (Roland® Jupiter8); SEM—multi-mode resonant low‑pass/high‑pass, band‑pass and notch, 2-pole 12 dB/octave (Oberheim®); SE80—dual resonant hi-pass/low-pass, 2-pole 12 dB/octave (Yamaha® CS-80).

Envelope 2

Attack, decay, sustain, and release pots; Center off toggle switch to select envelope invert or LFO gate trigger; Single or multiple triggering switch; Center off toggle switch to select drone and envelope 1 as master. With master selected, envelope 2 is the modulator for both the amplifier and filter frequency. Envelope 1 remains active for oscillator 2 frequency and oscillator 1 pulse width modulation.

XMod

Oscillator 2 mod depth pot with center off toggle switch to select modulation of oscillator 1 pulse width or oscillator 1 frequency.

LFO

Rate pot; MIDI sync on-off switch; Waveform pot: sine, triangle, saw up, saw down, square, offset square 1 and 2, random and slew random waveforms; Mod depth pot with center off toggle switch to select oscillator 1 frequency or oscillator 1 pulse width; Mod depth pot with center off toggle switch to select oscillator 2 frequency or oscillator 2 pulse width.

Amplifier

Center off toggle switch to select two levels of overdrive; Volume pot.

Tuning

Master tune pot.

Bender

Bend range pot.

Glide

Hardware exponential glide time pot.

Dynamics

(routes MIDI keyboard) Dynamics to filter frequency pot.

Envelope 1 to Pulse Width 1 (ENV1> PW1)

(routes) Envelope 1 to Oscillator 1 pulse width pot.

Mixer - OSC

Oscillator 1 level pot; Oscillator 2 level pot.

Mixer - Ring Mod

Hardware Ring Modulator level pot.

Mixer - Noise

Noise level pot.

Mixer - Feedback

(routes the synth's output back through the filter) Feedback level pot.

Front Panel Jacks

CV in, Gate in, Filter frequency modulation in, Amplifier modulation in, Oscillator out, External signal in.

Back Panel Jacks

MIDI In, MIDI Out, 1/4" Audio out, Traveller input (SE80 model only), DC power input.

Back Panel Switches

Learn switch: Selects MIDI channel.

Overflow Switch

For chaining together multiple Boomstars together via MIDI overflow.